A little advice please, g60 bits

[kay]

Hi

i have a mazda 323f v6 which i am looking at getting charged,

i came across a g60 for the charger its self as its smaller and will fit in the very tight bay,

i am wondering if they have been added to many cars and which bits will i need to go with it?

i have a little understanding whats needed as looked into a eaton blower but that was way too big and the g60 looks bit more complicated

many thanks

[Volksdevil]

Hi Kay,

The G-Lader supercharger is actually a very simple design The outer casing is in two halves, and a central scroll rotates on a top pivot point. This 'massages' air through the casing and out via one outlet.

The casing has two inlets (One either side) simply because in the standard setup, one is used as a 'boost return' but you can use either as an inlet, or both.

Neil.

Attached Image (Click thumbnail to expand)